Struct developer_hub::tutorial::currency_simple::pallet_v2::tests::runtime_v2::Runtime
source · pub struct Runtime;Implementations§
Trait Implementations§
source§impl CallerTrait<<Runtime as Config>::AccountId> for OriginCaller
impl CallerTrait<<Runtime as Config>::AccountId> for OriginCaller
source§fn into_system(self) -> Option<RawOrigin<<Runtime as Config>::AccountId>>
fn into_system(self) -> Option<RawOrigin<<Runtime as Config>::AccountId>>
Extract the signer from the message if it is a
Signed origin.source§fn as_system_ref(&self) -> Option<&RawOrigin<<Runtime as Config>::AccountId>>
fn as_system_ref(&self) -> Option<&RawOrigin<<Runtime as Config>::AccountId>>
Extract a reference to the system-level
RawOrigin if it is that.source§fn as_signed(&self) -> Option<&AccountId>
fn as_signed(&self) -> Option<&AccountId>
Extract the signer from it if a system
Signed origin, None otherwise.source§impl Config for Runtime
impl Config for Runtime
§type Block = Block<Header<u64, BlakeTwo256>, UncheckedExtrinsic<<Runtime as Config>::AccountId, <Runtime as Config>::RuntimeCall, (), ()>>
type Block = Block<Header<u64, BlakeTwo256>, UncheckedExtrinsic<<Runtime as Config>::AccountId, <Runtime as Config>::RuntimeCall, (), ()>>
The Block type used by the runtime. This is used by
construct_runtime to retrieve the
extrinsics or other block specific data as needed.§type Nonce = <TestDefaultConfig as DefaultConfig>::Nonce
type Nonce = <TestDefaultConfig as DefaultConfig>::Nonce
This stores the number of previous transactions associated with a sender account.
§type Hashing = <TestDefaultConfig as DefaultConfig>::Hashing
type Hashing = <TestDefaultConfig as DefaultConfig>::Hashing
The hashing system (algorithm) being used in the runtime (e.g. Blake2).
§type Lookup = <TestDefaultConfig as DefaultConfig>::Lookup
type Lookup = <TestDefaultConfig as DefaultConfig>::Lookup
Converting trait to take a source type and convert to
AccountId. Read more§type MaxConsumers = <TestDefaultConfig as DefaultConfig>::MaxConsumers
type MaxConsumers = <TestDefaultConfig as DefaultConfig>::MaxConsumers
The maximum number of consumers allowed on a single account.
§type AccountData = <TestDefaultConfig as DefaultConfig>::AccountData
type AccountData = <TestDefaultConfig as DefaultConfig>::AccountData
Data to be associated with an account (other than nonce/transaction counter, which this
pallet does regardless).
§type OnNewAccount = <TestDefaultConfig as DefaultConfig>::OnNewAccount
type OnNewAccount = <TestDefaultConfig as DefaultConfig>::OnNewAccount
Handler for when a new account has just been created.
§type OnKilledAccount = <TestDefaultConfig as DefaultConfig>::OnKilledAccount
type OnKilledAccount = <TestDefaultConfig as DefaultConfig>::OnKilledAccount
A function that is invoked when an account has been determined to be dead. Read more
type SystemWeightInfo = <TestDefaultConfig as DefaultConfig>::SystemWeightInfo
§type SS58Prefix = <TestDefaultConfig as DefaultConfig>::SS58Prefix
type SS58Prefix = <TestDefaultConfig as DefaultConfig>::SS58Prefix
The designated SS58 prefix of this chain. Read more
§type BlockWeights = <TestDefaultConfig as DefaultConfig>::BlockWeights
type BlockWeights = <TestDefaultConfig as DefaultConfig>::BlockWeights
Block & extrinsics weights: base values and limits.
§type BlockLength = <TestDefaultConfig as DefaultConfig>::BlockLength
type BlockLength = <TestDefaultConfig as DefaultConfig>::BlockLength
The maximum length of a block (in bytes).
§type DbWeight = <TestDefaultConfig as DefaultConfig>::DbWeight
type DbWeight = <TestDefaultConfig as DefaultConfig>::DbWeight
The weight of runtime database operations the runtime can invoke.
§type RuntimeEvent = RuntimeEvent
type RuntimeEvent = RuntimeEvent
The aggregated event type of the runtime.
§type RuntimeOrigin = RuntimeOrigin
type RuntimeOrigin = RuntimeOrigin
The
RuntimeOrigin type used by dispatchable calls.§type RuntimeCall = RuntimeCall
type RuntimeCall = RuntimeCall
The aggregated
RuntimeCall type.§type PalletInfo = PalletInfo
type PalletInfo = PalletInfo
Provides information about the pallet setup in the runtime. Read more
§type BaseCallFilter = <TestDefaultConfig as DefaultConfig>::BaseCallFilter
type BaseCallFilter = <TestDefaultConfig as DefaultConfig>::BaseCallFilter
The basic call filter to use in Origin. All origins are built with this filter as base,
except Root. Read more
§type BlockHashCount = <TestDefaultConfig as DefaultConfig>::BlockHashCount
type BlockHashCount = <TestDefaultConfig as DefaultConfig>::BlockHashCount
Maximum number of block number to block hash mappings to keep (oldest pruned first).
source§impl Config for Runtime
impl Config for Runtime
§type RuntimeEvent = RuntimeEvent
type RuntimeEvent = RuntimeEvent
The overarching event type of the runtime.
source§impl EnsureInherentsAreFirst<<Runtime as Config>::Block> for Runtime
impl EnsureInherentsAreFirst<<Runtime as Config>::Block> for Runtime
source§impl GetRuntimeBlockType for Runtime
impl GetRuntimeBlockType for Runtime
§type RuntimeBlock = <Runtime as Config>::Block
type RuntimeBlock = <Runtime as Config>::Block
The
RuntimeBlock type.source§impl PartialEq<Runtime> for Runtime
impl PartialEq<Runtime> for Runtime
source§impl ValidateUnsigned for Runtime
impl ValidateUnsigned for Runtime
§type Call = RuntimeCall
type Call = RuntimeCall
The call to validate
source§fn pre_dispatch(call: &Self::Call) -> Result<(), TransactionValidityError>
fn pre_dispatch(call: &Self::Call) -> Result<(), TransactionValidityError>
Validate the call right before dispatch. Read more
source§fn validate_unsigned(
source: TransactionSource,
call: &Self::Call
) -> TransactionValidity
fn validate_unsigned( source: TransactionSource, call: &Self::Call ) -> TransactionValidity
Return the validity of the call Read more
impl Copy for Runtime
impl Eq for Runtime
impl StructuralEq for Runtime
impl StructuralPartialEq for Runtime
Auto Trait Implementations§
impl RefUnwindSafe for Runtime
impl Send for Runtime
impl Sync for Runtime
impl Unpin for Runtime
impl UnwindSafe for Runtime
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
source§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere T: Any,
§fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>
fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>
Convert
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.§fn into_any_rc(self: Rc<T, Global>) -> Rc<dyn Any, Global>
fn into_any_rc(self: Rc<T, Global>) -> Rc<dyn Any, Global>
Convert
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.source§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key and return true if they are equal.§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key and return true if they are equal.§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,
Causes
self to use its Binary implementation when Debug-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,
Causes
self to use its Display implementation when
Debug-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,
Causes
self to use its LowerExp implementation when
Debug-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,
Causes
self to use its LowerHex implementation when
Debug-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,
Causes
self to use its Octal implementation when Debug-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,
Causes
self to use its Pointer implementation when
Debug-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,
Causes
self to use its UpperExp implementation when
Debug-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,
Causes
self to use its UpperHex implementation when
Debug-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
Borrows
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
Mutably borrows
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,
Borrows
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,
Mutably borrows
self, then passes self.as_mut() into the pipe
function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T. Read more§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere SS: SubsetOf<SP>,
§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self from the equivalent element of its
superset. Read more§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self is actually part of its subset T (and can be converted to it).§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset but without any property checks. Always succeeds.§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self to the equivalent element of its superset.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Immutable access to the
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Mutable access to the
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Immutable access to the
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Mutable access to the
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,
Immutable access to the
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,
Mutable access to the
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Calls
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Calls
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Calls
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Calls
.tap_ref_mut() only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from.§impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T.